Product Description
- Economy models of our surgical double drum sterilizers are made with stainless steel sterilization chamber and painted MS from outside; while ring and stand are made of heavy MS sheet and chrome plated. The lid is also made of MS and Stainless steel sheet line is fitted inside the lid.
- Deluxe models are made with stainless steel 304 from inner and outer and lid is also made of SS304; while ring and stand are made of chrome plated MS.
- In order to control the pressure, our double drum surgical autoclaves are equipped with automatic pressure switch (Danfoss make). Pressure is factory set at 15 to 20psi as required.
- A mechanical timer from 10 to 60 minute is fitted at control panel. Using this timer, operator can set time for sterilization cycle.
- While using a high pressure sterilization machine, safety becomes important part; therefore, we equip our double drum autoclave hospital machines with spring loaded safety valve which is fitted at top of the lid. It opens if pressure rises beyond set level.
- For heating, we use only ISI mark immersion heaters of 2 KW and 4 KW as per capacity of the autoclave. For their safety we offer low water cut-off device which is optional and fitted at extra cost.
- We also offer some optional accessories such as digital temperature controller cum timer with END cycle buzzer, Fully automatic operation using solenoid valves, all stainless steel construction (GMP model), RS232 computer interface etc.
Product Information
| Model | DDA-45 | DDA-75 |
|---|---|---|
| Volume | 45 Liters | 75 Liters |
| Inner dimensions | 12 x 22 Inch (Dia. x L) | 16 x 24 Inch (Dia. x L) |
| Drum capacity | 02 Nos. 11*9 inch | 02 Nos. 15*12 inch |
| Heater | ISI mark Immersion heater 2 KW | ISI mark Immersion heater 4 KW |
| MOC Exterior | Painted MS | |
| Stand and ring | Chrome plated MS | |
| Sterilization chamber | SS 304 | |
| Lid | Painted MS w/ SS inner line | |
| Locking system | Radial locking mechanism w/ pedal lifting device | |
| Pressure | 15 to 20 psi | |
| Temperature | 121°C to 125°C | |
| Pressure release | Manual release value | |
| Pressure display | Dial pressure gauge | |
| Pressure control | Automatic pressure control switch | |
| Gasket | High temperature joint less silicone rubber gasket | |
| Timer | Mechanical timer adjustable up to 60 minutes | |
| Safety | Spring loaded safety valve on lid | |
| Power supply | 220 Volts 50Hz | |
| Test confirmation | Hydraulic tested at 2.5 times of working pressure | |
Reviews
There are no reviews yet.