CO2 Incubator

Construction: Inner chamber is made of stainless steel 304 with rounded (coved) corners; while exterior is powder coated and painted for corrosion free performance.

Jacket Type: These CO2 incubators are available in both Air Jacket and Water Jacket.

Door: Each CO2 incubator comes with inner glass doors and outer door. Inner glass door keeps maintain stable environment and minimizes changes to humidity, temperature and CO2 concentration; moreover shortens recovery time and reduces risk of contamination

Trays: 3 nos. perforated stainless steel trays are provided with each CO2 incubator that are removable and height adjustable.

CO2 range: CO2 range is 0 to 20% with ±0.1% stability. It is measured by Thermal Conductivity sensor. The inlet pressure remains 0.1MPa.

Humidity: Air humidity remains up to 95%, which keeps cell cultures safe from drying out. For humidity, distilled water is kept at bottom of the chamber

Temperature: Temperature range is ambient+5°C to 50°C. PT1000 temperature sensor ensures excellent accuracy.

Air filter: A 0.3µ HEPA filter is fitted at inlet of CO2 gas injection system to keep away impurities and contaminations from entering into chamber.

Sterilization: Our CO2 incubators are available in both 90°C moist heat sterilization and UV light (254nm) sterilization. The overnight sterilization cycle ensures ef?cient decontamination without need of removal of internal fittings.

Alarm: There are alarms for power interruption, High/low temperature variation, deviation of CO2, RH, door ajar and independent over heat protection.